Продукция

 >> EW-PEXSG-AT

Новинки

EW-P70242L2

31-03-2017
EW-P70482L2 Lite

31-03-2017
EW-PEXSG-AT
Повторитель/удлинитель PoE 802.3at 10/100/1000 мб/с
31-03-2017
EW-Pi701616

23-01-2017
EW-PIP-AT
PoE инжектор стандарта IEEE-802.3at 30 Вт. в пластмассовом корпусе
23-01-2017

EW-PEXSG-AT

Повторитель/удлинитель PoE 802.3at 10/100/1000 мб/с

Характеристики

 


1-Port PoE Splitter (PD) and 1-Port PoE injector (PSE)
Extending distance for another 100M per extender and cascading for longer distances
IEEE 802.3at compliance
PoE Extender Introduction

EW-PEXSG-AT is a 2 port PoE extender designed for extending connection distance for another 100m (328 ft) on both ends via Cat-5e or Cat-6 cable. You can cover longer distances by cascading multiple EW-PEXSG-ATs together on a network. EW-PEXSG-AT does not need any additional power supply and the PoE device (such as an IP camera) is powered by PoE switch or PoE injector.

IEEE 802.3at and Power over Ethernet (PoE) ports

EW-PEXSG-AT features IEEE 802.3at Power over Ethernet (PoE). This product runs over existing LAN cable to power IEEE 802.3at compliant network accessories. It also features PoE awareness to verify whether the network device receive power is IEEE 802.3at compliant, or only the data will be sent through LAN cable. By adding EW-PEXSG-AT to the existing networking, the installed networking products, such as: Access Points and IP cameras can be easily managed and set up. Wireless device deployments are easily located or the networking can be extending distance for another 100M per extender and cascading for longer distances.

No Special Networking Cable Required

By adding PoE devices, you can use an existing standard Cat-5e or Cat-6 Ethernet cable without a new electrical outlet for both power and data. It helps you reduce installation time and cost.

Specifications      
         
Data Rate 10/100/1000 Mbps half/full duplex      
Connectors RJ45      
Network Cables Cat5e or better      
PoE ON/OFF Switch For turning PoE ON/OFF manually      
LED PoE/Data      
Compatible IEEE 802.3at, CE, FCC      
Mounting Wall      
Environment Indoor      
Operation Conditions -10 °C to 50 °C      
Dimensions 20 x 32 x 123 mm  and  20 x 29 x 103      
Weight 98g      
 
PoE Source Number of EW-PEXSG-AT Distance (m) PD voltage (V) PD Max power (W)
802.3at PoE switch 1 200 42,4 24,592
2 300 38 20,14
3 400 33,7 16,176
4 500 31,4 12,56